Reference Guide

22 Features
The switch can set DSCP values and map IPv6 DSCP to egress queues in the
same way it does for IPv4. The switch detects IPv6 frames by the IPv6 ether-
type.
For more information about Advanced QoS, see
QoS Advanced Mode .
TCP Congestion Avoidance
The TCP Congestion Avoidance feature activates an algorithm that breaks up
or prevents TCP global synchronization on a congested node, where the
congestion is due to multiple sources sending packets with the same byte
count.
For more information, see
TCP Congestion Avoidance .
Device Management Features
SNMP Alarms and Trap Logs
The system logs events with severity codes and timestamps. Events are sent as
SNMP traps to a Trap Recipient List.
For more information, see
SNMP .
SNMP Versions 1, 2, and 3
Simple Network Management Protocol (SNMP) over the UDP/IP protocol
controls access to the system. A list of community entries is defined, each
consisting of a community string and its access privileges. There are three
levels of SNMP security: read-only, read-write, and super. Only a super user
can access the Community table.
For more information, see
SNMP .
Web-Based Management
Web-based management enables managing the system from any web browser.
The system contains an Embedded Web Server (EWS) that serves HTML
pages, through which the system can be monitored and configured. The
system internally converts web-based input into configuration commands,
MIB variable settings, and other management-related settings.