Reference Guide

218 IP Addressing
3 To add a new IPv6 neighbor, click Add, and enter the fields:
–
IPv6 Interface — Displays the interface on which the IPv6 address is
defined.
–
IPv6 Address — Enter the neighbor IPv6 address.
–
MAC Address — Enter the MAC address assigned to the interface.
4 To modify or remove an IPv6 neighbor, click Edit , and enter the fields
described on the
Add page.
If an entry for the specified IPv6 address already exists in the neighbor
discovery cache, as learned through the IPv6 neighbor discovery process, you
can convert the entry to a static entry. To do this, select Static in the Ty p e
field.
Defining IPv6 Neighbors Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the IPv6 Neighbors pages.
Table 8-21. IPv6 Neighbors CLI Commands
CLI Command Description
ipv6 neighbor ipv6-address interface-
id mac-address
no ipv6 neighbor [[ipv6-address]
interface-id]
Configures a static entry in
the IPv6 neighbor discovery
cache.
Use the no form of this
command to remove a static
IPv6 entry from the IPv6
neighbor discovery cache.
show ipv6 neighbors {static |
dynamic}[ipv6-address ipv6-address]
[mac-address mac-address] [interface-
id]
Displays IPv6 neighbor
discovery cache information.
clear ipv6 neighbors Deletes all entries in the IPv6
neighbor discovery cache.