Reference Guide

180 Configuring System Information
The following is an example of the CLI commands:
sFlow Statistics
To view sFlow statistics:
1
Click System > sFlow > sFlow Statistics in the tree view to display the
sFlow Statistics page.
The following sflow statistics per interface are displayed:
–
Interface — Port for which sample was collected.
–
Packets Sampled — Number of packets sampled.
–
Datagrams Sent to Receiver — Number of sFlow sampling packets
sent.
2 Click Clear Statistics to clear the counters.
Viewing sFlow Statistics Using the CLI
The following table summarizes the CLI commands for viewing sFlow
statistics:
console(config)# interface te1/1
console(config-if)#sflow flow-sampling 1024 1
Table 7-50. sFlow Statistics CLI Command
CLI Command Description
show sflow statistics
[port-id]
Displays sFlow statistics for ports that are
enabled for Flow sampling or Counters
sampling.
clear sflow statistics
[port-id]
Clears sFlow statistics for ports that are
enabled for Flow sampling or Counters
sampling.