Reference Guide

Configuring System Information 173
The following is an example of the CLI commands:
File System
Use the File System page to view information about files currently stored on
the system, including file names, file sizes, files modifications, and file
permissions. The files system permits managing up to two user-defined
backup configuration files.
To view information about files:
1
Click System > File Management > File System in the tree view to
display the
File System page.
The following information is displayed for all files in the system:
–
File Name — The name of the file currently stored in the file
management system.
–
Size — The file size.
delete url Deletes a file from the FLASH
memory device.
console# delete startup-config
Delete startup-config [y/n]? y
console# 01-Oct-2006 16:10:51 %FILE-I-DELETE: File
Delete - file URL flash://startup-config
console# copy running-config startup-config
Overwrite file [startup-config] ?[Yes/press any key
for no]....01-Oct-2006 16:11
:47 %COPY-I-FILECPY: Files Copy - source URL running-
config destination URL flash://startup-config
01-Oct-2006 16:12:01 %COPY-N-TRAP:
The copy operation was completed successfully
Copy succeeded
Table 7-46. Copy Files CLI Commands (continued)
CLI Command Description