Reference Guide

Configuring System Information 169
• Global — A globally unique IPv6 address; visible and reachable
from different subnets.
–
Link Local Interface — When the server supports an IPv6 Link Local
address, this specifies the Link Local interface. The possible options
are:
•
VLAN1 — The VLAN on which the IPv6 interface is configured.
•
ISATAP — The IPv6 interface is configured on an ISATAP
tunnel.
To upload a configuration file using HTTP:
3
Select Upload via HTTP to upload a configuration file.
4 Enter the fields:
–
Transfer File Name — The configuration file being uploaded. The
possible options are:
•
Running Configuration — Uploads the Running Configuration
file.
•
Startup Configuration — Uploads the Startup Configuration file.
5 Click Activate to start the upload process. A message will be displayed
asking where for the path of the destination file.
To upload a configuration file using TFTP:
6
Select one of the options:
–
Firmware Upload — A firmware file is uploaded.
–
Configuration Upload — A configuration file is uploaded.
7 Select Upload via TFTP to upload firmware or a configuration file via a
TFTP server.
8 If Firmware Upload was selected, enter:
–
TFTP Server IP Address — The TFTP server IP address to which the
software image is uploaded.
–
Destination File Name (1-64 Characters) — The file name to which
the file is uploaded.
9 If Configuration Upload was selected, enter:
–
TFTP Server IP Address — The TFTP server IP address to which the
configuration file is uploaded.