Reference Guide

166 Configuring System Information
• Boot Code — Downloads the Boot file.
6 If the Configuration Download option was selected, enter the following:
–
Source File Name (1-64 Characters) — Enter the source file name.
–
Destination File Name — Select the destination file to which the
configuration file is downloaded. The possible options are:
•
Running Configuration — Check to download commands into
the Running Configuration file. The current file is overwritten.
•
Startup Configuration — Check to download commands into the
Startup Configuration file. The current file is overwritten.
•
My Backup —Name of backup file.
•
New File Name (1-64 Characters) — Check to copy commands
into a file in flash memory. Enter the filename.
7 Click Activate to start the download process.
To download files using TFTP
1 Click System > File Management > File Download in the tree view to
display the
File Download page.
2 Enter the IP Format fields for the TFTP server IP address.
–
Supported IP Format — Select whether IPv4 or IPv6 format is
supported.
–
IPv6 Address Type — When the server supports IPv6, this specifies
the type of static address supported. The possible options are:
•
Link Local — A Link Local address that is non-routable and used
for communication on the same network only.
•
Global — A globally unique IPv6 address; visible and reachable
from different subnets.
–
Link Local Interface — When the server supports an IPv6 Link Local
address, this specifies the Link Local interface. The possible options
are:
•
VLAN 1— The VLAN on which the IPv6 interface is configured.
•
ISATAP — The IPv6 interface is configured on an ISATAP
tunnel.