Reference Guide

152 Configuring System Information
or:
•
Object ID — Specify the device feature OID.
–
Filter Type — Select whether the defined OID branch will be
Included or Excluded in the selected SNMP view.
Configuring Notification Filters Using CLI Commands
The following table summarizes CLI commands for defining fields displayed
in the Notification Filter pages.
The following is an example of CLI commands:
Notification Recipients
An SNMP notification is a trap message, sent from the switch to the SNMP
management station, indicating that a certain event has occurred, such as a
link up or down.
Table 7-40. SNMP Notification Filter CLI Commands
CLI Command Description
snmp-server filter filter-name oid-
tree {included | excluded}
no snmp-server filter filter-name
[oid-tree]
Creates or updates an SNMP
notification filter.
Use the no form of this
command to remove the
specified SNMP server filter
entry.
show snmp filters
[filter-name] Displays the configuration of
SNMP notification filters
console (config)# snmp-server filter user1 iso
included
console(config)# end
console # show snmp filters
Name OID Tree Type
----------- ------------- --------
user1 iso Included