Reference Guide

150 Configuring System Information
• SNMP Admin — User has access to all device configuration
options, as well as permissions to modify the community.
–
View Name — Select a view from a list of user-defined SNMP views.
The view determines other characteristics associated with the
community.
5 To use Advanced mode, enter the fields:
–
Advanced — When SNMP Advanced mode is selected, you can select
an SNMP group to specify the SNMP access control rules for the
selected community. The SNMP Advanced mode is defined only with
SNMPv3.
–
Group Name — Select the group to be associated with the
community.
Configuring Communities Using CLI Commands
The following table summarizes the CLI commands for setting fields in the
Community pages.
Table 7-39. SNMP Community CLI Commands
CLI Command Description
snmp-server community community-
string [ro | rw | su] [ipv4-
address | ipv6-address] [mask
mask | prefix prefix-length]
[view view-name]
no snmp-server community
community-string [ip-address]
Sets up the community access string
to permit access to the SNMP
protocol.
Use the no form of this command to
remove the specified community
string
snmp-server community-group
community-string group-name
[ipv4-address | ipv6-address]
[mask mask | prefix prefix-
length]
Sets up community access string to
permit limited access to the SNMP
protocol, based on group access
rights.
show snmp Displays the current SNMP device
configuration.