Reference Guide

Configuring System Information 145
• Authentication — Authenticates SNMP messages, and ensures
that the origin of the SNMP message is authenticated.
•
Privacy — Encrypts SNMP message.
–
Operation — Select the group access rights. The possible options are:
•
Read — The management access is restricted to read-only, and
changes cannot be made to the assigned SNMP view. If desired,
select a view from the drop-down list.
•
Write — The management access is read-write and changes can
be made to the assigned SNMP view. If desired, select a view from
the drop-down list.
•
Notify — Sends traps for the assigned SNMP view. If desired,
select a view from the drop-down list.
Defining SNMP Access Control Using CLI Commands
The following table summarizes the CLI commands for defining fields
displayed in the Access Control pages.
Table 7-37. SNMP Access Control CLI Commands
CLI Command Description
snmp-server group groupname {v1
| v2 | v3 {noauth | auth | priv}
[notify notifyview]} [read
readview] [write writeview]
no snmp-server group groupname
{v1 | v2 | v3 [noauth | auth |
priv]}
Configure a new Simple Network
Management Protocol (SNMP)
group, or a table that maps SNMP
users to SNMP views.
Use the no form of this command to
remove a specified SNMP group.
show snmp groups [groupname] Displays the configuration of groups