Reference Guide

136 Configuring System Information
The following is an example of CLI commands:
radius-server key [key-string]
no radius-server key
Sets the authentication and
encryption key for all RADIUS
communications between the
router and the RADIUS server.
Use the no form of this
command to restore the
default configuration.
show radius-servers Displays the RADIUS server
settings.
console(config)# radius-server host 192.168.10.1
auth-port 20 timeout 20
console(config)# radius-server key enterprise-server
console# show radius-servers
IP address Port Port Time- Ret- Dead- Source IP Prio. Usage
Auth Acct Out rans Time
--------------- ----- ----- ------ ------ ------ --------------- ----- ---
1.1.1.11 1812 1813 Global Global Global Global 10 all
1.1.1.21 1812 1813 Global Global Global Global 19 all
1.1.1.31 1812 1813 Global Global Global Global 18 all
1.1.1.41 1812 1813 Global Global Global Global 17 all
1.1.1.51 1812 1813 Global Global Global Global 16 all
Global values
--------------
TimeOut : 3
Retransmit : 3
Deadtime : 0
Source IP : 0.0.0.0
Source IPv6 : ::
Table 7-34. RADIUS Server CLI Commands (continued)
CLI Command Description