Reference Guide

124 Configuring System Information
DELL CONFIDENTIAL – PRELIMINARY 3/6/14 - FOR PROOF ONLY
The following is an example of the CLI commands:
Enable Password
To set a local password to control access to Normal and Privilege levels
activities.
1
Click System > Management Security > Enable Password in the tree
view to display the
Enable Password page.
2 Enter the fields:
– Select Enable Access Level — Select the access level to associate with
the enable password. The lowest user access level is
1 and 15 is the
highest user access level. Users with access level 15 are Privileged
Users, and only they can access and use the Network Administrator.
–
Password (0-159 characters) — Enter the enable password.
–
Confirm Password — Confirm the password.
–
Expiry Date — If Aging is selected, displays the expiration date of the
enable password.
–
Lockout Status — Displays the number of failed authentication
attempts since the user last logged in successfully (if the
Enable
Login Attempts
checkbox is selected in the Password Management
page.) Specifies
LOCKOUT , when the user account is locked.
–
Reactivate Suspended User — Check to reactivate the specified user’s
access rights. Access rights can be suspended after unsuccessfully
attempting to login.
console(config)# line console
console(config-line)# password dell