Reference Guide

120 Configuring System Information
DELL CONFIDENTIAL – PRELIMINARY 3/6/14 - FOR PROOF ONLY
The following is an example of the CLI commands that sets authentication
for the console using the default method list that was previously-defined:
The following is an example of the CLI commands that creates an
authentication method list for http server access (RADIUS and local):
Active Users
To view active users on the device:
•Click System > Management Security > Active Users in the tree view to
display the
Active Users page.
The following fields are displayed for all active users:
–
Name — Active users logged into the device.
–
Protocol — The management method by which the user is connected
to the device.
–
Location — The user’s IP address.
show authentication methods
Displays information about the
authentication methods.
console(config)#line console
console(config-line)# enable authentication default
console(config-line)# login authentication default
console(config-line)# exit
console(config)# ip http authentication aaa login-
authentication radius local
console(config)# exit
Table 7-26. Select Authentication CLI Commands (continued)
CLI Command Description