Reference Guide

Configuring System Information 115
DELL CONFIDENTIAL – PRELIMINARY 3/6/14 - FOR PROOF ONLY
Defining Access Profile Rules Using CLI Commands
The following table summarizes the CLI commands for adding rules to access
profiles.
Table 7-24. Access Profiles CLI Commands
CLI Command Description
permit [interface-id] [service
service]
Sets port permit conditions for the
management access list.
permit ip-source {ipv4-address |
ipv6-address/prefix-length}
[mask {mask | prefix-length}]
[interface-id] [service service]
Sets port permitting conditions for
the management access list, and the
selected management method.
deny [interface-id] [service
service]
Sets port denying conditions for the
management access list, and the
selected management method.
deny ip-source {ipv4-address |
ipv6-address/prefix-length}
[mask {mask | prefix-length}]
[interface-id] [service service]
Sets port denying conditions for the
management access list, and the
selected management method.
management access-class
{console-only | name}
no management access-class
Defines which access-list is used as
the active management connections.
Use the no form of this command to
disable management connection
restrictions.
show management access-list
[name]
Displays the active management
access-lists.
show management access-class Displays information about
management access-class.