Reference Guide

114 Configuring System Information
DELL CONFIDENTIAL – PRELIMINARY 3/6/14 - FOR PROOF ONLY
• Permit — Permits access to the device.
•
Deny — Denies access to the device.
Defining Access Profiles Using CLI Commands
The following table contains the CLI command for defining an access profile,
without its rules. The CLI commands for defining the rules are described in
Defining Access Profile Rules Using CLI Commands .
The following is an example of the CLI commands:
Profile Rules
If an access profile already exists, meaning that a single rule has been defined
on it, use the Profile Rules pages to add additional rules to it.
To add a rule to a management access profiles:
1
Click System > Management Security > Profile Rules in the tree view to
display the
Profile Rules: Summary page.
2 Select an access profile name. Its rules are displayed in the order that they
will be implemented.
3 To add a rule to the selected access profile, click Add .
4 Select an access profile from the Access Profile Name list.
5 Complete the fields that are defined in the Access Profiles section above.
Table 7-23. Access Profile CLI Commands
CLI Command Description
management access-list
name
no management access-list
name
Defines an access-list for management.
Use the no form of this command to delete an
access list.
console(config)# management access-list mlist
console(config-macl)#