Reference Guide

Configuring System Information 105
DELL CONFIDENTIAL – PRELIMINARY 3/6/14 - FOR PROOF ONLY
To define the default domain name:
1
Click System > Domain Name > Default Domain Name to display the
Default Domain Name page.
If there is a currently-defined default domain name, it is displayed.
2 Enter the Default Domain Name (1 - 158 Characters).
Its Ty p e is displayed, and has one of the following options:
–
Dynamic — The IP address was created dynamically.
–
Static — The IP address is a static IP address.
Defining Default Domain Names Using the CLI Commands
The following table summarizes the CLI commands for configuring the
default domain name:
The following is an example of the CLI commands:
Host Name Mapping
Host names can be dynamically mapped to IP addresses through the Domain
Name System pages, or statically through the Host Name Mapping page.
To assign IP addresses to static host names.
1
Click System > Domain Name > Host Name Mapping in the tree view
to display the
Host Name Mapping: Summary page.
The currently-defined host names are displayed.
2 Click Add to add a new host name. Up to four IP addresses can be added.
Table 7-19. Default Domain Name CLI Commands
CLI Command Description
ip domain name name
no ip domain name
Defines a default domain name that the software uses
to complete unqualified host names.
The no form of the command disables the use of the
Domain Name System (DNS).
console(config)# ip domain name dell.com