Reference Guide

100 Configuring System Information
DELL CONFIDENTIAL – PRELIMINARY 3/6/14 - FOR PROOF ONLY
The following is an example of the CLI commands:
Remote Log Server
Log messages can be sent to remote log servers, using the SYSLOG protocol.
To add a remote log server:
1
Click System > Logs > Remote Log Server in the tree view to display the
Remote Log Server: Summary page.
The previously-defined remote servers are displayed.
2 To add a remote log server, click Add , and enter the fields:
–
Supported IP Format — Select whether the IPv4 or IPv6 format is
supported.
–
IPv6 Address Type — When the server supports IPv6, this specifies
the type of static address supported. The possible options are:
•
Link Local — A Link Local address that is non-routable and used
for communication on the same network only.
•
Global — A globally unique IPv6 address; visible and reachable
from different subnets.
–
Link Local Interface — When the server supports an IPv6 Link Local
address, this specifies the Link Local interface. The possible options
are:
•
VLAN 1 — The VLAN on which the IPv6 interface is configured.
•
ISATAP — The IPv6 interface is configured on an ISATAP
tunnel.
console (config)# aaa login-history file
console# show users login-history
Login Time Username Protocol Location
----------- -------- -------- ----------
01-Oct-2010 23:58:17 admin HTTP 172.16.1.8
01-Oct-2010 07:59:23 admin Telnet 172.16.0.8