Reference Guide

820 Quality of Service (QoS) Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\QoS.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
qos map dscp-queue
Use the qos map dscp-queue Global Configuration mode command to
configure the DSCP to queue map. Use the no form of this command to
restore the default configuration.
Syntax
qos map dscp-queue dscp-list to queue-id
no qos map dscp-queue [ dscp-list ]
Parameters
• dscp-list —Specifies up to 8 DSCP values, separated by spaces. (Range: 0–
63)
•
queue-id —Specifies the queue number to which the DSCP values are
mapped.
Default Configuration
The default map for 8 queues is as follows.
Command Mode
Global Configuration mode
Example
The following example maps DSCP values 33, 40 and 41 to queue 1.
console(config)# qos map dscp-queue 33 40 41 to 1
qos map dscp-dp
Use the qos map dscp-dp Global Configuration mode command to map the
DSCP values to Drop Precedence. Use the no form of this command to
restore the default configuration.
DSCP value 0 1-8 9-15 16,24,40,
48-63
17-23 25-31 33-39 32,41-47
Queue-ID 2 137 4568