Reference Guide

ACL Commands 763
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\ACL.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
If a range of ports is used for source port, it is counted again if it is also used
for destination port.
Example
console(config)# ip access-list extended server
console(config-ip-al)# deny ip 176.212.0.0 00.255.255
any
ipv6 access-list (IPv6 extended)
Use the ipv6 access-list Global Configuration mode command to define an
IPv6 access list (ACL) and to place the device in Ipv6 Access-list
Configuration mode. All commands after this command refer to this ACL.
The rules (ACEs) for this ACL are defined in the permit ( IPv6 ) and deny (
IPv6 ) commands. The service-acl input command is used to attach this ACL
to an interface.
Use the no form of this command to remove the access list.
Syntax
ipv6 access-list [ acl-name]
no ipv6 access-list [acl-name]
Parameters
acl-name—Name of the IPv6 access list. Range 1-32 characters.
Default Configuration
No IPv6 access list is defined.
Command Mode
Global Configuration mode
User Guidelines
IPv6 ACL is defined by a unique name. IPv4 ACL, IPv6 ACL, MAC ACL or
policy maps cannot have the same name.
Every IPv6 ACL has an implicit permit icmp any any nd-ns any, permit icmp
any any nd-na any, and deny ipv6 any any statements as its last match