Reference Guide

736 IPv6 Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\IPv6_Router.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
User Guidelines
When the ipv6-address or ipv6-prefix / prefix-length argument is specified, a
longest match lookup is performed from the routing table and only route
information for that address or network is displayed. Only the information
matching the criteria specified in the command syntax is displayed. For
example, when the
interface-id argument is specified, only the specified
interface-specific routes are displayed.
When the detail keyword is specified, the reason why the route is not valid is
displayed for invalid direct or fully specified routes.
Example
Example 1. The following is sample output from the show ipv6 static
command without specified options:
console# show ipv6 static
IPv6 Static routes Code: * - installed in Routing Information
Base (RIB)
IPv6 Static routes distance is 1
* 3000::/16, interface VLAN1, metric 1
* 4000::/16, via nexthop 2001:1::1, metric 1
5000::/16, interface VLAN2, metric 1
* 5555::/16, via nexthop 4000::1, metric 1
5555::/16, via nexthop 9999::1, metric 1
* 5555::/16, via nexthop 4001:AF00::1, metric 1
* 6000::/16, via nexthop 2007::1, metric 1
Example 2. The following is sample output from the show ipv6 route
command when entered with the IPv6 prefix 2001:200::/35:
console# show ipv6 static 2001:200::/35
IPv6 Static routes Code: * - installed in Routing Information
Base (RIB)
IPv6 Static routes distance is 1
* 2001:200::/35, via nexthop 4000::1, metric 1
2001:200::/35, via nexthop 9999::1, metric 1