Reference Guide

IPv6 Commands 735
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\IPv6_Router.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
IPv6 Routing Table Summary - 97 entries
37 local, 35 connected, 25 static
Number of prefixes:
/16: 1, /28: 10, /32: 5, /35: 25, /40: 1, /64: 9
/96: 5, /112: 1, /127: 4, /128: 36
show ipv6 static
Use the show ipv6 static command in user EXEC or privileged EXEC mode
to display the current static routes of the IPv6 routing table.
Syntax
show ipv6 static [ ipv6-address | ipv6-prefix / prefix-length ] [interface
interface-id ][detail]
Parameters
• ipv6-address —Provides routing information for a specific IPv6 address.
This argument must be in the form documented in RFC4293 where the
address is specified in hexadecimal using 16-bit values between colons.
•
ipv6-prefix —Provides routing information for a specific IPv6 network. This
argument must be in the form documented in RFC4293 where the address
is specified in hexadecimal using 16-bit values between colons.
•
/ prefix-length —Length of the IPv6 prefix. A decimal value that indicates
how many of the high-order contiguous bits of the address comprise the
prefix (the network portion of the address). A slash mark must precede the
decimal value.
•
interface interface-id —Identifier of an interface.
•
detail —Specifies for invalid routes, the reason why the route is not valid.
Default Configuration
All IPv6 static routing information for all active routing tables is displayed.
Command Mode
User EXEC mode
Privileged EXEC mode