Reference Guide

IPv6 Commands 733
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\IPv6_Router.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
When the ipv6-address or ipv6-prefix / prefix-length argument is specified, a
longest match lookup is performed from the routing table and only route
information for that address or network is displayed. When the icmp, nd,
connected, local, or static keywords are specified, only that type of route is
displayed. When the
interface-id argument are specified, only the specified
interface-specific routes are displayed.
Example
Example 1. The following is sample output from the show ipv6 route
command when IPv6 Routing is not enabled and the command is entered
without an IPv6 address or prefix specified:
console# show ipv6 route
Codes: > - Best
S - Static, I - ICMP Redirect, ND - Router Advertisment
[d/m]: d - route’s distance, m - route’s metric
IPv6 Routing Table - 6 entries
S> ::/0 [1/1]
via fe80::77 VLAN 1
ND> ::/0 [11/0]
via fe80::200:cff:fe4a:dfa8 VLAN 1 Lifetime 1784 sec
ND> 2001::/64 [0/0]
via :: VLAN 100
ND> 2002:1:1:1::/64 [0/0]
via :: VLAN 100
ND> 3001::/64 [0/0]
via :: VLAN 101
ND> 4004::/64 [0/0]
via :: VLAN 110
Example 2. The following is sample output from the show ipv6 route
command when IPv6 Routing is enabled and the command is entered
without an IPv6 address or prefix specified and IPv6 Routing is enabled:
console# show ipv6 route