Reference Guide

IPv6 Commands 731
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\IPv6_Router.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Example
Example 1. The following is sample output from the show ipv6 neighbors
command when entered with an interface-id:
console# show ipv6 neighbors vlan 1
IPv6 Address Age Link-layer Addr State Interface
Router
2000:0:0:4::2 0 0003.a0d6.141e REACH VLAN1
Yes
3001:1::45a - 0002.7d1a.9472 REACH VLAN1
-
FE80::203:A0FF:FED6:141E 0 0003.a0d6.141e REACH VLAN1
No
Example 2. The following is sample output from the show ipv6 neighbors
command when entered with an IPv6 address:
console# show ipv6 neighbors 2000:0:0:4::2
IPv6 Address Age Link-layer Addr State Interface
Router
2000:0:0:4::2 0 0003.a0d6.141e REACH VLAN1
Yes
Field Descriptions:
• Total number of entries —Number of entries (peers) in the cache.
•
IPv6 Address —IPv6 address of neighbor or interface.
•
Age —Time (in minutes) since the address was confirmed to be reachable.
A hyphen (-) indicates a static entry.
•
Link-layer Addr —MAC address. If the address is unknown, a hyphen (-) is
displayed.
•
Interface —Interface which the neighbor is connected to.
•
Router —Specifies if the neighbor is a Router. A hyphen (-) is displayed for
static entries.