Reference Guide

IPv6 Commands 717
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\IPv6_Router.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
ipv6 unicast-routing
Use the ipv6 unicast-routing command in Global Configuration mode to
enable the forwarding of IPv6 Unicast datagrams.
To disable the forwarding of IPv6 Unicast datagrams, use the no form of this
command.
Syntax
ipv6 unicast-routing
no ipv6 unicast-routing
Parameters
N/A.
Default Configuration
IPv6 Unicast routing is disabled.
Command Mode
Global Configuration mode
Example
The following example enables the forwarding of IPv6 Unicast datagrams:
console(config)# ipv6 unicast-routing
ipv6 unreachables
Use the ipv6 unreachables command in Interface Configuration mode to
enable the generation of Internet Control Message Protocol for IPv6
(ICMPv6) unreachable messages for any packets arriving on a specified
interface.
To prevent the generation of unreachable messages, use the no form of this
command.