Reference Guide

IPv6 Commands 701
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\IPv6_Router.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Default Configuration
0 seconds (unspecified) is advertised in router advertisements and the value
1000 milliseconds is used for the neighbor discovery activity of the router
itself.
Command Mode
Interface Configuration mode
User Guidelines
This value will be included in all IPv6 router advertisements sent out this
interface. Very short intervals are not recommended in normal IPv6 operation.
When a non-default value is configured, the configured time is both
advertised and used by the router itself.
Example
The following example configures an IPv6 neighbor solicit transmission
interval of 9000 milliseconds for VLAN 1:
console(config)# interface vlan 1
console(config-if)#
ipv6 nd ns-interval 9000
console(config-if)#
exit
ipv6 nd other-config-flag
Use the ipv6 nd other-config-flag command in Interface Configuration mode
to set the Other Stateful configuration flag in IPv6 router advertisements.
To clear the flag from IPv6 router advertisements, use the no form of this
command.
Syntax
ipv6 nd other-config-flag
no ipv6 nd other-config-flag
Parameters
N/A.