Reference Guide

IPv6 Commands 699
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\IPv6_Router.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Command Mode
Interface Configuration mode
User Guidelines
Use this command if you want to change the default value. The default value
is defined by the ipv6 hop-limit command.
Example
The following example configures a maximum number of 15 hops for router
advertisements on VLAN 2:
console(config)# interface vlan 2
console(config-if)#
ipv6 nd hop-limit 15
console(config-if)#
exit
ipv6 nd managed-config-flag
Use the ipv6 nd managed-config-flag command in Interface Configuration
mode to set the “managed address configuration flag” in IPv6 router
advertisements.
To clear the flag from IPv6 router advertisements, use the no form of this
command.
Syntax
ipv6 nd managed-config-flag
no ipv6 nd managed-config-flag
Parameters
N/A.
Default Configuration
The “managed address configuration flag” flag is not set in IPv6 router
advertisements.
Command Mode
Interface Configuration mode