Reference Guide

694 IPv6 Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\IPv6_Router.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
be sent. When the bucket is empty of tokens, IPv6 ICMP error messages are
not sent until a new token is placed in the bucket.
Average Packets Per Second = (1000/
milliseconds ) * bucketsize .
To disable ICMP rate limiting, set the
milliseconds argument to zero.
Example
The following example shows an interval of 50 milliseconds and a bucket size
of 20 tokens being configured for IPv6 ICMP error messages:
console(config)# ipv6 icmp error-interval 50 20
ipv6 link-local default zone
Use the Ipv6 link-local default zone command to configure an interface to
egress a link local packet without a specified interface or with the default zone
0.
Use the no form of this command to return the default link local interface to
the default value.
Syntax
Ipv6 link-local default zone interface-id
no Ipv6 link-local default zone
Parameters
• interface-id —Specifies the interface that is used as the egress interface for
packets sent without a specified IPv6Z interface identifier or with the
default 0 identifier.
Default
By default, link local default zone is disabled.
Command Mode
Global Configuration mode