Reference Guide

692 IPv6 Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\IPv6_Router.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Example
The following example enables VLAN 1 for the IPv6 addressing mode.
console(config)# interface vlan 1
console(config-if)# ipv6 enable
console(config-if)#
exit
ipv6 hop-limit
Use the ipv6 hop-limit command in Global Configuration mode to configure
the maximum number of hops used in all IPv6 packets that are originated by
the router.
To return the hop limit to its default value, use the no form of this command.
Syntax
ipv6 hop-limit value
no ipv6 hop-limit
Parameters
• value —Maximum number of hops. The acceptable range is from 1 to 255.
Default Configuration
The default is 64 hops.
Command Mode
Global Configuration mode
Example
The following example configures a maximum number of 15 hops for all IPv6
packets that are originated from the router:
console(config)# ipv6 hop-limit 15