Manualshelf

Reference Guide

ManualsBrandsDell ManualsComputer HardwarePowerEdge VRTX
651652653654655656657658659660
654 DHCP Relay Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\DCHP_Relay.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Number of DHCP Relays enabled on VLANs without IP Address: 2
DHCP relay is enabled on Ports: te0/1,po1-2
Active: te0/1
Inactive: po1-2
DHCP relay is enabled on VLANs: 1, 2, 4, 5
Active: 1, 2, 4, 5
Inactive:
Global Servers: 1.1.1.1 , 2.2.2.2
Example 3. Option 82 is supported (enabled) and there DHCP Servers
defined per interface:
console#
show ip dhcp relay
DHCP relay is globally enabled
Option 82 is enabled
Maximum number of supported VLANs without IP Address is 4
Number of DHCP Relays enabled on VLANs without IP Address: 2
DHCP relay is enabled on Ports: te0/1,po1-2
Active: te0/1
Inactive: po1-2
DHCP relay is enabled on VLANs: 1, 2, 4, 5
Active: 1, 2, 4, 5
Inactive:
Global Servers: 1.1.1.1 , 2.2.2.2
VLAN 1: 1.1.1.1, 100.10.1.1
VLAN 2: 3.3.3.3, 4.4.4.4, 5.5.5.5
VLAN 10: 6.6.6.6
ip dhcp information option
Use the ip dhcp information option Global Configuration command to
enable DHCP option-82 data insertion. Use the no form of this command to
disable DHCP option-82 data insertion.