Reference Guide

652 DHCP Relay Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\DCHP_Relay.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
no ip dhcp relay address [ ip-address ]
Parameters
• ip-address —Specifies the DHCP server IP address. Up to 8 servers can be
defined.
Default Configuration
No server is defined.
Command Mode
Interface Configuration mode
User Guidelines
Use the ip dhcp relay address command to define a DHCP Server IP address
per the interface. To define multiple DHCP Servers, use the command
multiple times.
To remove a DHCP server, use the no form of the command with the
ip-
address
argument.
The no form of the command without the
ip-address argument deletes all
DHCP servers.
Example
The following example defines the DHCP server on the device.
console(config-if)# ip dhcp relay address 176.16.1.1
show ip dhcp relay
Use the show ip dhcp relay EXEC mode command to display the DHCP
relay information.
Syntax
show ip dhcp relay
Command Mode
User EXEC mode