Reference Guide

622 GARP VLAN Registration Protocol Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\GVRP.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Example
The following example clears all GVRP statistical information on te0/ 4.
console# clear gvrp statistics te0/4
show gvrp configuration
Use the show gvrp configuration EXEC mode command to display GVRP
configuration information, including timer values, whether GVRP and
dynamic VLAN creation are enabled, and which ports are running GVRP.
Syntax
show gvrp configuration [interface-id | detailed ]
Parameters
• interface-id —Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
•
detailed —Displays information for non-present ports in addition to
present ports.
Default Configuration
All GVRP statistics are displayed for all interfaces. If detailed is not used,
only present ports are displayed.
Command Mode
User EXEC mode
Example
The following example displays GVRP configuration.
console# show gvrp configuration
GVRP Feature is currently Enabled on the device.
Maximum VLANs: 4094