Reference Guide

GARP VLAN Registration Protocol Commands 619
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\GVRP.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
no garp timer
Parameters
• The following specify the type of timer. The possible values are:
–
join —Specifies the GARP join timer. The timer value for this type of
timer specifies the time interval between the two join messages sent
by the GARP application.
–
leave —Specifies the GARP leave timer. The timer value for this type
of timer specifies the time interval for a GARP application to wait for
a join message after receiving a leave message for a GARP attribute,
before it de-registers the GARP attribute.
–
leaveall —Specifies the GARP leaveall timer. The timer value for this
type of timer specifies the time interval between leaveall messages for
a GARP entity, which prompt other GARP entities to re-reregister all
attribute information on this entity.
•
timer-value —Specifies the timer value in milliseconds in multiples of 10.
(Range: 10–2147483640)
Default Configuration
The following are the default timer values:
• Join timer —200 milliseconds
•
Leave timer —600 milliseconds
•
Leaveall timer —10000 milliseconds
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
The timer-value must be a multiple of 10.
The following relationship must be maintained between the timers:
• The leave timer value must be greater than or equal to three times the join
timer.
• The leave-all timer value must be greater than the leave timer.