Reference Guide

Link Aggregation Control Protocol Commands 613
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\LACP.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Default Configuration
The default port timeout value is Long.
Command Mode
Interface (Ethernet) Configuration mode
Example
The following example assigns a long administrative LACP timeout to te0/ 1.
console(config)# interface te0/1
console(config-if)#
lacp timeout long
show lacp
Use the show lacp Privileged EXEC mode command to display LACP
information for all Ethernet ports or for a specific Ethernet port.
Syntax
show lacp interface-id [parameters | statistics | protocol-state ]
Parameters
• interface-id —Specify an interface ID. The interface ID must be an
Ethernet port
•
parameters —Displays parameters only.
•
statistics —Displays statistics only.
•
protocol-state —Displays protocol state only.
Command Mode
Privileged EXEC mode
Example
The following example displays LACP information for te0/ 1.
console# show lacp ethernet te0/1
Port te0/1 LACP parameters: