Reference Guide

612 Link Aggregation Control Protocol Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\LACP.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Syntax
lacp port-priority value
no lacp port-priority
Parameters
value—Specifies the port priority. (Range: 1use the no form of this
command65535)
Default Configuration
The default port priority is 1.
Command Mode
Interface (Ethernet) Configuration mode
Example
The following example sets the priority of te0/1.
console(config)# interface te0/1
console(config-if)#
lacp port-priority 247
lacp timeout
Use the lacp timeout Interface (Ethernet) Configuration mode command to
assign an administrative LACP timeout to an interface. Use the no form of
this command to restore the default configuration.
Syntax
lacp timeout {long | short}
no lacp timeout
Parameters
• long —Specifies the long timeout value.
•
short —Specifies the short timeout value.