Reference Guide

IGMP Snooping Commands 589
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\IGMP_Snooping.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Default Configuration
Learning pim-dvmrp is enabled.
Command Mode
Global Configuration mode
User Guidelines
Multicast router ports are learned according to:
• Queries received on the port
•PIM/PIMv2 received on the port
• DVMRP received on the port
• MRDISC received on the port
• MOSPF received on the port
You can execute the command before the VLAN is created.
Example
console(config)# ip igmp snooping vlan 1 mrouter learn pim-
dvmrp
ip igmp snooping vlan mrouter interface
Use the ip igmp snooping mrouter interface Global Configuration mode
command to define a port that is connected to a Multicast router port. Use
the no form of this command to remove the configuration.
Syntax
ip igmp snooping vlan vlan-id mrouter interface i nterface-list
no ip igmp snooping vlan vlan-id mrouter interface interface-list
Parameters
• vlan-id —Specifies the VLAN.
•
interface-list —Specifies the list of interfaces. The interfaces can be one of
the following types: Ethernet port or Port-channel.