Reference Guide

VLAN Commands 573
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\VLAN.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Example
The following example enables te0/4 to receive Multicast transmissions from
VLANs 5, 6, 7.
console(config)# interface te0/4
console(config-if)# switchport customer multicast-tv vlan
add 5-7
show vlan multicast-tv
Use the show vlan Multicast-tv EXEC mode command to display the source
and receiver ports of Multicast-TV VLAN. Source ports can transmit and
receive traffic to/from the VLAN, while receiver ports can only receive traffic
from the VLAN.
Syntax
show vlan Multicast-tv vlan vlan-id
Parameters
• vlan-id —Specifies the VLAN ID.
Default Configuration
N/A
Command Mode
User EXEC mode
Example
The following example displays information on the source and receiver ports
of Multicast-TV VLAN 1000.
console# show vlan multicast-tv vlan 1000
Source Ports
------------
te0/3, te0/4
Receiver Ports
----------------------
te0/1-2