Reference Guide

VLAN Commands 559
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\VLAN.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
•ipx
Example
The following example maps the IP protocol to protocol group number 213.
console(config)# vlan database
console(config-vlan)# map protocol ip protocols-group 213
switchport general map protocols-group vlan
Use the switchport general map protocols-group vlan Interface
Configuration mode command to forward packets based on their protocol,
otherwise known as setting up a classifying rule. This command forwards
packets arriving on an interface containing a specific protocol to a specific
VLAN. Use the no form of this command to stop forwarding packets based on
their protocol.
Syntax
switchport general map protocols-group group vlan vlan-id
no switchport general map protocols-group group
Parameters
• group —Specifies the group number as defined in map protocol protocols-
group
command (range: 1–65535).
•
vlan-id —Defines the VLAN ID in the classifying rule.
Default Configuration
N/A
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
The VLAN classification rule priorities are:
• MAC-based VLAN (best match among the rules)