Reference Guide

LLDP Commands 477
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\LLDP.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Syntax
clear lldp table [interface-id]
Parameters
interface-id—Specifies a port ID.
Default Configuration
If no interface is specified, the default is to clear the LLDP table for all ports.
Command Mode
Privileged EXEC mode
Example
console# clear lldp table te0/1
lldp med location
Use the lldp med location Interface (Ethernet) Configuration mode
command to configure the location information for the LLDP Media
Endpoint Discovery (MED) for a port. Use the no form of this command to
delete location information for a port.
Syntax
lldp med location {{coordinate data} | {civic-address data} | {ecs-elin
data}}
no lldp med location {coordinate | civic-address | ecs-elin}
Parameters
• coordinate data —Specifies the location data as coordinates in
hexadecimal format.
•
civic-address data —Specifies the location data as a civic address in
hexadecimal format.
•
ecs-elin data —Specifies the location data as an Emergency Call Service
Emergency Location Identification Number (ECS ELIN) in hexadecimal
format.