Reference Guide

Address Table Commands 429
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\Address_Table.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Parameters
• mac-address —MAC address (Range: Valid MAC address)
•
vlan-id — Specify the VLAN
•
interface-id —Specify an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel (Range: valid ethernet port,
valid port-channel)
•
permanent —The permanent static MAC address. The keyword is applied
by the default.
•
delete-on-reset —The delete-on-reset static MAC address.
•
delete-on-timeout —The delete-on-timeout static MAC address.
•
secure —The secure MAC address. May be used only in a secure mode.
Default Configuration
No static addresses are defined. The default mode for an added address is
permanent.
Command Mode
Global Configuration mode
User Guidelines
Use the command to add a static MAC address with given time-to-live in any
mode or to add a secure MAC address in a secure mode.
Each MAC address in the MAC address table is assigned two attributes: type
and time-to-live.
The following value of time-of-live is supported:
• permanent —MAC address is saved until it is removed manually.
•
delete-on-reset —MAC address is saved until the next reboot.
•
delete-on-timeout —MAC address that may be removed by the aging
timer.
The following types are supported:
• static — MAC address manually added by the command with the following
keywords specifying its time-of-live:
–permanent