Reference Guide

Preface 41
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\CLI_Preface_DellPlasma.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Specifying Multiple Interfaces
Interface Range
Interfaces can be specified on an individual basis or within a range. The
interface range command has the following syntax:
<interface-range> ::=
{ <first-port>[ - <last-port-number] |
<first-port-channel>[ - <last-port-channel-number>] |
<first-tunnel>[ - <last-tunnel-number>] |
<first-vlan>[ - <last-vlan-id>]}
A sample of this command is shown in the example below:
Interface List
A combination of interface types can be specified in the interface range
command in the following format:
<range-list> ::= <interface-range> | <range-list>, <
interface-range>
Up to five ranges can be included.
Range lists can contain either ports and port-channels or VLANs.
Combinations of port/port-channels and VLANs are not allowed.
The space after the comma is optional.
When a range list is defined, a space after the first entry and before the
comma (,) must be entered.
Internal 10G ports 9-12 tengigabitethernet 3/1.... tengigabitethernet 3/4
Internal 10G ports 13-16 tengigabitethernet 4/1.... tengigabitethernet 4/4
console#configure
console(config-if)#interface range gi0/1-4
Port Type and Number Software Port Naming Convention in CLI/WEB