Reference Guide

Template Last Updated - 2/7/2007 Port Channel Commands 403
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
24
Port Channel Commands
channel-group
Use the channel-group Interface (Ethernet) Configuration mode command
to associate a port with a port-channel. Use the no form of this command to
remove a port from a port-channel.
Syntax
channel-group port-channel mode {on | auto}
no channel-group
Parameters
• port-channel —Specifies the port channel number for the current port to
join.
•
mode —Specifies the mode of joining the port channel. The possible
values are:
–
on —Forces the port to join a channel without an LACP operation.
–
auto —Forces the port to join a channel as a result of an LACP
operation.
Default Configuration
The port is not assigned to a port-channel.
Command Mode
Interface (Ethernet) Configuration mode
Default mode is on.