Reference Guide

40 Preface
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\CLI_Preface_DellPlasma.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Port Naming Convention
The following describes the types of ports and port naming conventions of
the ports on the R1-2210 device.
Types of Ports on the R1-2210 Switch
The following ports are found on the R1-2210 switch:
• 20 x 10G Ethernet Ports. These consist of:
–
4 external ports —Connected to network (visible when the switch is in
the chassis)
–
16 internal ports —Connected to blade servers (not visible when the
switch is in the chassis)
– 2 x 1 Gigabit/s Ethernet Ports.
• Single Internal Out-of-Band port
The switch supports an Out-of-Band (OOB) port that is connected to the
management network of the chassis.
Port Naming Convention
There are 5 groups of 10G ports, numbered 0-4. Group 0 represents the
external ports and groups 1-4 represents the internal ports that are connected
to blade servers 1-4.
There are 2 1G ports.
External/Internal Ports
The following naming convention is used for internal and external ports:
tengigabitethernet group/port_number or te group/port_number
The following table maps the hardware network port numbers to the software
interface port numbers and describe how they are referred to in the CLI/GUI:
Port Type and Number Software Port Naming Convention in CLI/WEB
External 10G ports 1-4 and
External 1G ports 1-2
tengigabitethernet 0/1.... tengigabitethernet 0/4.
gigabitethernet 0/1, gigabitethernet 0/2
Internal 10G ports 1-4 tengigabitethernet 1/1.... tengigabitethernet 1/4
Internal 10G ports 5-8 tengigabitethernet 2/1.... tengigabitethernet 2/4