Reference Guide

Template Last Updated - 2/7/2007 Green Ethernet 395
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
23
Green Ethernet
NOTE: Some CLI commands or parameters described below are not applicable for
fiber ports. Refer to Port Features.
green-ethernet energy-detect (global)
Use the green-ethernet energy-detect Global Configuration mode command
to enable Green-Ethernet Energy-Detect mode globally. Use the no form of
this command to disabled it.
Syntax
green-ethernet energy-detect
no green-ethernet energy-detect
Parameters
N/A
Default Configuration
Disabled.
Command Mode
Global Configuration mode
Example
console(config)# green-ethernet energy-detect
green-ethernet energy-detect (interface)
Use the green-ethernet energy-detect Interface configuration mode
command to enable Green Ethernet-Energy-Detect mode on a port. Use the
no form of this command, to disable it on a port.