Reference Guide

384 PHY Diagnostics Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\Phy_Diagnostics.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
show fiber-ports optical-transceiver
Use the show fiber-ports optical-transceiver Privileged EXEC mode
command to display the optical transceiver diagnostics.
Syntax
show fiber-ports optical-transceiver [interface interface-id | detailed ]
Parameters
• interface-id —Specify an Ethernet port ID.
•
detailed —Displays information for non-present ports in addition to
present ports.
Default Configuration
All ports are displayed. If detailed is not used, only present ports are displayed.
Command Mode
Privileged EXEC mode
Example
The following examples display the optical transceiver diagnostics results.
console# show fiber-ports optical-transceiver
Port Temp Voltage Current Output Input LOS
Power Power
----------- ------ ------- ------- ------ ----- ---
te0/1 W OK OK OK OK OK
te0/2 OK OK OK E OK OK
Temp - Internally measured transceiver temperature
Voltage - Internally measured supply voltage
Current - Measured TX bias current
Output Power - Measured TX output power in milliWatts
Input Power - Measured RX received power in milliWatts
LOS - Loss of signal