Reference Guide

Ethernet Configuration Commands 377
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\Ethernet.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Syntax
storm-control broadcast enable
no storm-control broadcast enable
Parameters
N/A
Default Configuration
Disabled
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
Use the storm-control include-multicast Interface Configuration command
to count Multicast packets and optionally unknown Unicast packets in the
storm control calculation.
Example
console(config)# interface te0/1
console(config-if)#
storm-control broadcast enable
storm-control broadcast level kbps
Use the storm-control broadcast level Interface Configuration mode
command to configure the maximum rate of broadcast on a port. Use the no
form of this command to return to default.
Syntax
storm-control broadcast level kbps kbps
no storm-control broadcast level
Parameters
kbps—Maximum of kilobits per second of Broadcast traffic on a port. (Range
3500 – max port speed)