Reference Guide

Ethernet Configuration Commands 361
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\Ethernet.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Default Configuration
The interface does not have a description.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Example
The following example adds the description ‘SW#3’ to te0/4.
console(config)# interface te0/4
console(config-if)#
description SW#3
speed
Use the speed Interface (Ethernet, Port Channel) Configuration mode
command to configure the speed of a given Ethernet interface when not
using auto-negotiation. Use the no form of this command to restore the
default configuration.
Syntax
speed {10 | 100 | 1000 |10000}
no speed
Parameters
• 10 —Forces10 Mbps operation
•
100 —Forces 100 Mbps operation
•
1000 —Forces 1000 Mbps operation
•
10000 —Forces 10000 Mbps operation
Default Configuration
The port operates at its maximum speed capability.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode