Reference Guide

Template Last Updated - 2/7/2007 Ethernet Configuration Commands 357

DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY

Ethernet Configuration Commands

NOTE: Some CLI commands or parameters described below are not applicable for

fiber ports. Refer to Port Features.

interface

Use the interface Global Configuration mode command to enter Interface

configuration mode in order to configure an interface.

Syntax

interface

interface-id

Parameters

interface-id—Specifies an interface ID. The interface ID can be one of the

following types: Ethernet port, port-channel, VLAN, range, OOB, IP interface

or tunnel.

Default Configuration

N/A

Command Mode

Global Configuration mode

Examples

Example 1—For Ethernet ports:

console(config)#

interface

te0/1

console(config-if)#

Example 2—For port channels (LAGs):

console(config)#

interface

po1

console(config-if)#