Reference Guide

802.1X Commands 325
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\802_1X.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
dot1x auth-not-req
Use the dot1x auth-not-req Interface Configuration (VLAN) mode command
to enable unauthorized devices access to a VLAN. Use the no form of this
command to disable access to a VLAN.
Syntax
dot1x auth-not-req
no dot1x auth-not-req
Parameters
N/A
Default Configuration
Access is enabled.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
A VLAN cannot be defined as an unauthenticated VLAN if it is an access
VLAN or it is the native VLAN for some ports.
If a VLAN is configured as an unauthenticated VLAN, traffic tagged with that
VLAN and received from a member port of that VLAN will be bridged
regardless of whether the port/host is authorized or not.
The guest VLAN cannot be configured as unauthorized VLAN.
Example
The following example enables unauthorized devices access to VLAN 5.
console(config)# interface vlan 5
console(config-if)# dot1x auth-not-req