Reference Guide

Template Last Updated - 2/7/2007 SYSLOG Commands 291
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
17
SYSLOG Commands
logging on
Use the logging on Global Configuration mode command to enable message
logging. This command sends debug or error messages asynchronously to
designated locations. Use the no form of this command to disable the
logging.
Syntax
logging on
no logging on
Parameters
N/A
Default Configuration
Message logging is enabled.
Command Mode
Global Configuration mode
User Guidelines
The logging process controls the logging messages distribution at various
destinations, such as the logging buffer, logging file or SYSLOG server.
Logging on and off at these destinations can be individually configured using
the logging buffered, logging file, and logging on Global Configuration mode
commands. However, if the logging on command is disabled, no messages are
sent to these destinations. Only the console receives messages.
Example
The following example enables logging error messages.
console(config)# logging on