Reference Guide

186 SNMP Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\SNMP.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
• version 3 —SNMPv2 traps or informs are used
• Authentication options are available for SNMP v3 only. The following
options are available:
–
noauth —Specifies no authentication of a packet.
–
auth —Specifies authentication of a packet without encryption.
–
priv —Specifies authentication of a packet with encryption.
•
community-string —Password-like community string sent with the
notification operation. (Range: 1–20 characters). For v1 and v2, any
community string can be entered here. For v3, the community string must
match the user name defined in snmp-server user (ISCLI) command for
v3.
•
udp-port port —UDP port of the host to use. The default is 162. (Range:
1–65535)
•
filter filtername —Filter for this host. If unspecified, nothing is filtered.
The filter is defined using
snmp-server filter (no specific order of
commands is imposed on the user). (Range: Up to 30 characters)
•
timeout seconds —(For informs only) Number of seconds to wait for an
acknowledgment before resending informs. The default is 15 seconds.
(Range: 1–300)
•
retries retries —(For informs only) Maximum number of times to resend
an inform request, when a response is not received for a generated
message. The default is 3. (Range: 0–255)
Default Configuration
Version: SNMP V1
Type of notification: Traps
udp-port: 162
If informs are specified, the default for retries: 3
Timeout: 15
Command Mode
Global Configuration mode