Reference Guide

Management ACL Commands 161
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\Management_ACL.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Parameters
• interface-id — Specify an interface ID. The interface ID can be one of the
following types: Ethernet port, Port-channel or VLAN
•
service service — Specifies the service type. Possible values are: Telnet,
SSH, HTTP, HTTPS and SNMP.
•
ipv4-address — Specifies the source IPv4 address.
•
ipv6-address/ipv6-prefix-length — Specifies the source IPv6 address and
source IPv6 address prefix length. The prefix length must be preceded by a
forward slash (/). The parameter is optional.
•
mask mask — Specifies the source IPv4 address network mask. This
parameter is relevant only to IPv4 addresses.
•
mask prefix-length — Specifies the number of bits that comprise the
source IPv4 address prefix. The prefix length must be preceded by a
forward slash (/). This parameter is relevant only to IPv4 addresses. (Range:
0–32)
Default Configuration
No rules are configured.
Command Mode
Management Access-list Configuration mode
User Guidelines
Rules with Ethernet, VLAN, and port-channel parameters are valid only if an
IP address is defined on the appropriate interface.
Example
The following example permits all ports in the ACL called mlist
console(config)# management access-list mlist
console(config-macl)# switch
permit